This stove has all the features of the Hungry Penguin but has taller oven box, ideal for bakers and bread makers, lover of sticky cakes and savoury bakes. This stoves cooker does it all, it keeps you warm, cooks your dinner and boils your kettle for a coffee afterwards. It allows you to make the most of the fuel that you’re using to heat your room, it feels like you are cooking for free!
It can also be really appealing for canal boats, studios and homes where you don’t want to be dependant on mains gas and electricity, or if you just like the back up of being warm and fed in a power cut
| Hungry Penguin (Tall Order) Eco | £2,525.00 |
| Other 5kW Tall Order Stoves: | = |
| High and Mighty (Tall Order) Eco | |
| Fat Penguin (Tall Order) Eco | £2,680.00 |
| Colours | |
| Penguin Black (standard) | FREE |
| Seal Grey/Storm Blue/Charred Red/Evergreen | £110.00 |
| Polar Bear Belly | £125.00 |
| Factory fitted SMOKE CONTROL kit included All Prices shown are RRP and include Vat |
The tall order stoves grew out of a customer suggestion, it all began with a phone call, “this might be a tall order but can you make me a stove with a taller oven? I want to bake bread in it”. We now make a tall order version of each of our 5 kW stoves cooker, the Hungry Penguin, the Fat penguin and the High and Mighty penguin.
COOKING ON A PENGUIN
All our stoves cooker models have an oven box and top plate (oven top surface). The oven temperature can reach up to 300°C, but it will tick over comfortably between 140-180°C. You can fit a small saucepan and kettle on the top plate. In the tall order stoves, there are two cooking positions, the oven bottom shelf and the mid height shelf. We have cookware designed for our stoves available in our online shop.
STAINLESS STEEL TOP PLATES
If you regularly use the top plate there is an optional stainless steel top plate available. This sits on top of the stove and has a U shaped cut out for the flue. Alternatively, if you plan to rear flue, you can order one with no cut out. (a flat stove top and/or stainless top without cut out should be specified at point of order)
There is also a steel corner top plate option, called a “triongl”, a perfect size for a single kettle or pan to sit on, available in our online shop.
There is a vent hole at the rear of the oven box, this allows cooking smells to escape up the flue. If you want any cooking inspiration see our recipe page.
ECODESIGN STOVES
In order to be an Ecodesign stove, a stove must be independently verified to meet stringent emission requirements. Particulates or PMs are the most commonly recognised of these measures. The maximum limit for these is 40 mg/m3. The Hungry Penguin achieves 33 mg/m3 burning wood and 12 mg/m3 burning smokeless fuel. All other measures for the Hungry Penguin are all listed in our technical details table below. Click here for further Ecodesign info.
Charred Red
Storm Blue
Polar Bear
Seal Grey
Evergreen
Penguin Black
See stove colours for more detail.
| Fuel Type | Wood | Smokeless Fitted |
| Nominal Output | 4.7kw | 4.8kw |
| Efficiency | 81.2% | 87% |
| Dimensions | ||
| Hungry Penguin (Tall Order) | ||
| Width 380mm | Depth 367mm | Height 783mm |
| Internal Oven Dimension | ||
| Width 250mm | Depth 220mm | Height 200mm |
| Multi-fuel | Yes | |
| Colours Available | Yes | |
| Optional Direct air kit | Yes (factor fitted) | |
| Optional plinth | Yes | |
| Approved for use in smoke control zones | Yes | |
| Log length × diameter | length 270mm | diam 100mm |
| Flue collar diameter | 127mm (ID) | |
| Flue size required | 125mm | |
| Ecodesign measures | ||
| Particulates @ 13% O2 | 33mg/m3 | 12mg/m³ |
| CO content @13% O2 | 0.10% | 0.06% |
| NOx mg/m³ | 135mg/m3 | 119mg/m³ |
| CxHy mg /m³ | 96 mg/m3 | 37 mg/m³ |
| Top Exit Rear Exit | standard swap flue collar & blanking | |
| option for rear flue can be factory fitted if selected at point of order | ||
| Distance to combustibles + | ||
| side 550mm | rear 350mm | above 450mm |
| Distance to combustibles with insulated flue fitted to stove top * | ||
| Side 550 mm | rear 250mm | above 450 mm |
| Distance to non combustibles | ||
| side 100mm | rear 50mm | above 150mm |
| Hearth Type | with no base heat shield/plinth | Constructional |
| Hearth Type | with base heat shield/plinth | 12mm |
| * these are the minimum distances, be aware that there are other considerations eg. access for sweeping, height of kettle etc | ||
| + if single wall ie. non insulated flue is used then the distance to combustibles at the rear is equal to 3 x flue diameter | ||